Home›How to Make Feminized Seeds
DIY guide
How to Make Feminized Seeds with STS Spray
By California Plant Science · Updated November 2026
Feminized seeds come from pollen made by a female plant. Spray a female with silver thiosulfate (STS) and her treated flowers turn male and make pollen. Because she has no male chromosome to pass on, that pollen gives you seeds that grow overwhelmingly female.
This guide follows the STS protocol published by the USDA Agricultural Research Service, which is based on peer-reviewed research on female hemp plants (Lubell & Brand, 2018).
What you need
- Silver nitrate (reagent grade)
- Sodium thiosulfate
- Reverse osmosis or deionized water
- A digital scale that reads to 0.01 g
- Two 1 L bottles (one dark or amber for the silver nitrate), a measuring cylinder and a spray bottle
- Nitrile gloves, safety goggles, a lab coat and a respirator
- A fume hood or a very well-ventilated area for mixing
Step 1: Make the two stock solutions
| Stock solution | Amount | Water |
|---|---|---|
| A: 20 mM silver nitrate | 3.40 g | 1 L |
| B: 20 mM sodium thiosulfate (anhydrous) | 3.16 g | 1 L |
If your sodium thiosulfate is the pentahydrate form, use 4.96 g instead. Keep stock A in a dark bottle away from light, or mix it fresh on the day you spray.
Step 2: Mix the spray on the day you use it
Combine 1 part stock A with 4 parts stock B. Slowly pour A into B while stirring.
| Spray batch | Stock A (silver nitrate) | Stock B (sodium thiosulfate) |
|---|---|---|
| 100 mL | 20 mL | 80 mL |
| 250 mL | 50 mL | 200 mL |
| 500 mL | 100 mL | 400 mL |
The finished spray is about 4 mM STS. It oxidizes quickly, so use the whole batch that day and never save leftovers.
Step 3: Spray on schedule
- Pick a true female that is just starting to show flowers.
- Spray the top flower clusters until there’s slight runoff. Focus on the top only.
- First spray: right before you switch the plant to 12-hour days.
- Second spray: one week later, with a fresh batch.
- Third spray: one week after that, with another fresh batch. That’s three applications in total.
- Don’t overdo it. Too much STS can turn every flower male, and then the plant makes no seed.
- Harvest seed about 6–8 weeks after spraying, once the seeds are fully mature and the plant has dried.
Safety
- Read the safety data sheets for silver nitrate and sodium thiosulfate before you start.
- Wear nitrile gloves, safety goggles and a lab coat. Mix stock solutions in a fume hood.
- Wear a respirator while spraying.
- Never smoke, eat or extract a treated plant.
- Don’t pour leftovers down the drain. Silver is harmful to aquatic life.
Source: USDA Agricultural Research Service, “Silver Thiosulfate (STS) Solution Preparation and Application”, based on Lubell, J.D. & Brand, M.H. (2018), Foliar Sprays of Silver Thiosulfate Produce Male Flowers on Female Hemp Plants, HortTechnology 28(6): 743–747.